Changes between Version 7 and Version 8 of GENIExperimenter/Tutorials/jacks/GetStart_PartI_IPRoute/Procedure/DesignSetup
- Timestamp:
- 10/30/14 17:52:24 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/jacks/GetStart_PartI_IPRoute/Procedure/DesignSetup
v7 v8 317 317 <tr> 318 318 <td > 319 <ol type='a' start='1 1'>319 <ol type='a' start='12'> 320 320 <li>Now click on the unlabeled box in the middle of the link between "NodeA" and "NodeB".</li> 321 <li>Enter an IP Address for the " node-0/NodeA" interface of <i>192.168.1.10</i>.</li>321 <li>Enter an IP Address for the "NodeA" interface of <i>192.168.1.10</i>.</li> 322 322 <li>Enter a Mask of <i>255.255.255.0</i>.</li> 323 <li>Scroll down further and set IP Address of the " node-1/NodeB" interface to <i>192.168.1.11</i> and a Mask of <i>255.255.255.0</i>.</li>324 <li>Continue by setting the IP addresses and masks as shown in Figure X-X.</li>323 <li>Scroll down further and set IP Address of the "NodeB" interface to <i>192.168.1.11</i> and a Mask of <i>255.255.255.0</i>.</li> 324 <li>Continue by setting the IP addresses and masks for the remaining four interfaces as shown in Figure X-X.</li> 325 325 </ol> 326 326 </td>