Changes between Version 9 and Version 10 of GENIExperimenter/Tutorials/jFed/GettingStarted_PartII_ndn/Procedure/Setup

Timestamp:

07/05/16 16:31:20 (8 years ago)

Author:

tteixeir@bbn.com

Comment:

--

GENIExperimenter/Tutorials/jFed/GettingStarted_PartII_ndn/Procedure/Setup

@@ -209 +209 @@
 
 === 3.3. Modify the RSpec to automatically download scripts and execute commands ===  
-GENI allows you to install and execute commands automatically. In the RSpec you have just added there is a tarball with the necessary files and a script that will automatically run when the nodes boot-up.[[br]] 
+jFed allows you to install and execute commands automatically. In the RSpec you have just added there is a tarball with the necessary files and a script that will automatically run when the nodes boot-up.[[br]] 
 For more information about scripts, refer to [http://groups.geni.net/geni/wiki/HowTo/WriteInstallScript Write Install Script] [[br]]
-To view the commands, please follow the instructions below:
+To view/edit these commands, please follow the instructions below:
                  
 {{{  
@@ -219 +219 @@
     <td>  
       <ol type='a'>  
-        <li>Click on <q>Experimenter</q> node and scroll down to add the link to the tarball (see figure).</li>   
-        <li>In the <q>Execute Command</q>
+        <li>Double click on a node, and then click on the "Boot scripts" tab.</li>
+        <li>To add commands, click on the "+" button.</li>  
       </ol>  
     </td>
     <td align="right">  
-      <img src="http://192.1.242.151/images/ExecuteCommand.png?format=raw" width='200'/>  <br/>  
+      <img src="http://192.1.242.151/images/jFed/jFedViewScript.png?format=raw" width='400'/>  <br/>  
       <b>Figure 3-4</b> Automating your configuration.  
     </td>