= Lab Zero: A First Experiment Using GENI and jFed Tool =

== Overview ==

This is a first, simple experiment on GENI useful for familiarizing new experimenters with GENI and the tools for using GENI.

=== What you will learn ===
The high levels goals for this exercise are to:
 1. Understand what happens behind the scenes when you run and experiment in GENI
 1. Learn about RSpecs and the GENI AM API
 1. Learn about the Omni experimenter tool


=== Experiment Topology and Setup ===

{{{
#!html
<img src="http://groups.geni.net/geni/attachment/wiki/GEC17Agenda/GettingStartedWithGENI_I/Graphics/2vmvlan_overview.png?format=raw" height="152" alt="Tutorial Setup"/>
}}}

Reserve two VMs at the same location connected by a Layer 2 circuit.  

== Background ==

[wiki:GENIExperimenter/Tutorials/GettingStarted_PartI/Background Background information] about pre-requisites, tools, resources, and where to get help.


== Video ==

 * A [https://www.youtube.com/watch?v=vCOtltU3rX0&list=UUg_vFA7gvYEcILfAZlfL9Bw video] of the Lab Zero exercise

== Procedure ==
{{{
#!html


<table id="Table_01" height="409" border="0" cellpadding="0" cellspacing="0">
	<tr>
		<td>
			<a href="./Procedure/DesignSetup"><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/design.png?format=raw" width="152" height="152" alt="Design/Setup"></a>
               </td>
               <td>
<ul> 
             <li><a href="./Procedure/DesignSetup">Part I: Design/Setup</a></li>
             <ul>
                 <li>Step 1:  Design Experiment</li>
                 <li>Step 2:  Establish Management Environment</li>
                 <li>Step 3:  Obtain Resources</li>
             </ul></ul>
               </td>
	</tr>
	<tr>
		<td>
			<a href="./Procedure/Execute"><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/execute.png?format=raw" width="152" height="143" alt="Execute"></a>
                </td>
		<td>
             <ul>
<li><a href="./Procedure/Execute">Part II: Execute</a></li>
             <ul> 
                 <li>Step 4:  Configure and Initialize Services </li>
                 <li>Step 5:  Execute Experiment </li>
                 <li>Step 6:  Analyze and Visualize Experiment </li>
             </ul></ul>
                </td>
	</tr>
	<tr>
		<td>
			<a href="./Procedure/Finish"><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/finish.png?format=raw" width="152" height="114" alt="Finish"></a>
                </td>

		<td>
             <ul>
             <li><a href="./Procedure/Finish">Part III: Finish</a></li>
             <ul>
                 <li>Step 7:  Teardown Experiment</li>
                 <li>Step 8:  Archive Experiment</li>
             </ul></ul>
                </td>

	</tr>
</table>