Changes between Version 38 and Version 39 of GENIExperimenter/Tutorials/jFed/GettingStarted_PartI/Procedure/DesignSetup
- Timestamp:
- 03/22/15 09:51:49 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/jFed/GettingStarted_PartI/Procedure/DesignSetup
v38 v39 357 357 </table> 358 358 </li> 359 <li>Repeat the above step. You should now see two node boxes on the canvas.</li> 359 <li>To edit the node, double click on the node box.</li> 360 <li> From the "Select testbed" drop-down, pick the aggregate assigned to you. <b> DO NOT forget to do this </b></li> 361 <li>Select the node and press the "Duplicate" button. You should now see two node boxes on the canvas.</li> 360 362 <li>Now click near one of the node boxes on the canvas, then click and drag towards the other node. Release when you reach the other node. You should now see a line and a box representing a link connecting the two nodes.</li> 361 363 <li>The canvas should now look like the picture on the right.</li> … … 377 379 378 380 <li>In the "Name" field at the top, replace "node0" with "client".</li> 379 <li> From the "Select testbed" drop-down, pick the aggregate assigned to you. <b> DO NOT forget to do this </b> 380 <li>Repeat for the node labeled, "node1". In the "Name" field at the top, replace "node1" with "server" and <b> select the aggregate </b> assigned to you.</li> 381 <li>Repeat for the node labeled, "node1". In the "Name" field at the top, replace "node1" with "server".</li> 381 382 382 383 </ol>
