Changes between Version 12 and Version 13 of GENIExperimenter/Tutorials/jFed/GettingStarted_PartI/Procedure/DesignSetup


Ignore:
Timestamp:
10/17/14 13:01:55 (9 years ago)
Author:
rrhain@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIExperimenter/Tutorials/jFed/GettingStarted_PartI/Procedure/DesignSetup

    v12 v13  
    287287            <li>Now click near one of the node boxes on the canvas, then click and drag towards the other node.  Release when you reach the other node.  You should now see a line and a box representing a link connecting the two nodes.</li>
    288288            <li>The canvas should now look like the picture on the right.</li>
    289             <li>To edit the name of each node, click the node.</li>
    290           </ol>
    291        </td>
    292        <td>
    293 
    294         <img border="0" src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/JFedLab0_6.png?format=raw" alt="Two VMs connected by a link."  width="400" title="Two VMs connected by a link." />
    295 <br />
    296          <b>Figure 3-5</b> <i>Two VMs connected by a link.</i>
     289            <li>To edit the name of each node, double click on the node.</li>
     290          </ol>
     291       </td>
     292       <td>
     293
     294        <img border="0" src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/JFedLab0_6.png?format=raw" alt="Two nodes connected by a link."  width="400" title="Two nodes connected by a link." />
     295<br />
     296         <b>Figure 3-5</b> <i>Two nodes connected by a link.</i>
    297297       </td>
    298298    </tr>
     
    303303
    304304
    305             <li>In the field at the top, replace "VM" with "client".</li>
     305            <li>In the "Name" field at the top, replace "node0" with "client".</li>
     306            <li>Repeat for the node labeled, "node1".  In the "Name" field at the top, replace "node1" with "server".</li>
    306307
    307308         </ol>
     
    317318       <td >
    318319         <ol  type='a' start='10'>
    319             <li>Now click on "Interfaces and Links" (this is the middle tab with the "link" symbol").</li>
     320            <li>Now click on the "link" box.</li>
    320321            <li>Enter an IP Address for this node of <i>10.1.1.1</i>.</li>
    321322            <li>Enter a Mask of <i>255.255.255.0</i>.</li>
    322             <li>Then Press "Apply" at the bottom of the screen.</li>
    323             <li>Repeat the above six steps for the second VM, labeling it "server" and setting the server's IP Address to <i>10.1.1.2</i> and a Mask of <i>255.255.255.0</i>.</li>
     323            <li>Scroll down further and set that interface to the server's IP address of <i>10.1.1.2</i> and a Mask of <i>255.255.255.0</i>.</li>
    324324          </ol>
    325325       </td>