[[PageOutline]] = Setting up your laptop with GENI Tools = Some of the tutorials at this camp will require you have a laptop that has: 1. The Omni experimenter tool installed, 1. A browser capable of running Flash clients, and 1. An ssh client. == 1. Install Omni == === Mac OS x === 1. Download the package: [http://groups.geni.net/geni/attachment/wiki/UGREE-GENI/GREE-WC2014/toolSetup/MacOS/omniTools.dmg?format=raw omniTools.dmg]. 1. Install the package using [wiki:GENIExperimenter/Tutorials/ToolsSetup/OmniMacOsX these instructions]. === Windows === 1. Download this file: [http://groups.geni.net/geni/attachment/wiki/UGREE-GENI/GREE-WC2014/toolSetup/Windows/omni-tools-2.4.2-setup.exe?format=raw omni-tools-2.4.2-setup.exe]. 1. Install the package using [wiki:GENIExperimenter/Tutorials/ToolsSetup/OmniWindows these instructions]. [[BR]] '''Note''' The Windows Command Prompt can be found by navigating: `Start menu -> Programs -> Accessories -> Command Prompt` === Linux === 1. Download the GCF package from http://software.geni.net/local-sw/download&software=gcf-2.4.1.tar.gz 1. Install the GCF package using instructions at http://trac.gpolab.bbn.com/gcf/wiki/QuickStart. The Omni tool is part of the GCF package. ===Test the installation=== 1. Open a new terminal window. 1. In this terminal window, run the command: {{{ omni.py --version }}} If omni prints out its version number, you are all set! == 2. SSH Client == == 3. Flash-enabled Browser ==