Changes between Version 15 and Version 16 of GENIExperimenter/Tutorials/SystematicExprCaseStudy/SmallTopoQuagga/DesignSetup
- Timestamp:
- 08/05/16 14:24:55 (8 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/SystematicExprCaseStudy/SmallTopoQuagga/DesignSetup
v15 v16 67 67 (4) Repeat for each of the list shown in the network configuration address assignment list. [[BR]] 68 68 69 === iii. Delete Routes installed by InstaGENI === 69 === iii. Delete Routes installed by InstaGENI === #delete 70 70 To overcome the issues faced in topologies with loops due to the way routes are installed in InstaGENI, we need to delete those routes on each node. This can be done by turning off and then turning on all the interfaces on a node except ''' ''eth0'' '''. The script to do this task can be found at ''' ''http://www.gpolab.bbn.com/experiment-support/Utilities/ClearRoutesIG.tar.gz'' '''. 71 71 … … 75 75 (4) Scroll down till you see ''Execute Command'' and click on ''Add''. Enter ''sh /local/ClearRoutesIG.sh'' in the box. [[BR]] 76 76 77 === iv. Disable RP Filtering === 77 === iv. Disable RP Filtering === #disable 78 78 Reverse Path Filtering is enabled by default in Linux. This creates issues for topologies with loops. Hence we have to disable Reverse Path Filtering on all interfaces except ''' ''eth0'' '''. The script to turn off Reverse Path Filtering can be found at ''' ''http://www.gpolab.bbn.com/experiment-support/Utilities/DisableRPFiltering.tar.gz'' '''. 79 79