Changes between Version 64 and Version 65 of GENIExperimenter/Tutorials/SystematicExprCaseStudy/SmallTopo/DesignSetup


Ignore:
Timestamp:
05/09/16 08:59:13 (8 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GENIExperimenter/Tutorials/SystematicExprCaseStudy/SmallTopo/DesignSetup

    v64 v65  
    8484}}}
    8585
     86You may now reserve your resources by scrolling to the bottom of the `Add Resources` page ans clicking on the ''' ''Reserve Resources'' ''' button:
     87
     88[[Image(ReserveResources.jpg,60%)]]
     89
    8690
    8791== b. Manually Configure OSPF for XORP ==
    8892
    89 In this tutorial, we configure each VM as an virtual router running `OSPF` routing protocol.  Examples of `XORP` configurations can be found at [http://www.xorp.org/getting_started.html#configuring XORPExamples]. For each VM running as a software router, the `OSPF` configuration file will be named `ospfd.conf` and stored in `/etc/xorp/`.
     93In this tutorial we configure each VM as a virtual router running the `OSPF` routing protocol.  Examples of `XORP` configurations can be found at [http://www.xorp.org/getting_started.html#configuring XORPExamples]. For each VM running as a software router, the `OSPF` configuration file will be named `ospfd.conf` and stored in `/etc/xorp/`.
    9094
    9195We first configure `OSPF` on `router-1`. The sample configuration file for `router-1` can be downloaded from [http://groups.geni.net/geni/raw-attachment/wiki/GENIExperimenter/Tutorials/SystematicExprCaseStudy/SmallTopo/DesignSetup/r1-ospf.conf here], where you may find the interface information in the sample file may be different from `router-1`'s interfaces.