Changes between Version 29 and Version 30 of GENIExperimenter/Tutorials/SystematicExprCaseStudy/SmallTopo/DesignSetup
- Timestamp:
- 08/14/14 16:16:20 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/SystematicExprCaseStudy/SmallTopo/DesignSetup
v29 v30 92 92 In this tutorial, we configure each VM as an virtual router running `OSPF` routing protocol. Examples of `XORP` configurations can be found at [http://www.xorp.org/getting_started.html#configuring XORPExamples]. For each VM running as a software router, the `OSPF` configuration file will be named `ospfd.conf` and stored in `/etc/xorp/`. 93 93 94 We first configure `OSPF` on `router-1`. The configuration file can be downloaded from [http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/SystematicExprCaseStudy/SmallTopo/DesignSetup/r1-ospf.conf here]. 94 We first configure `OSPF` on `router-1`. The sample configuration file for `router-1` can be downloaded from [http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/SystematicExprCaseStudy/SmallTopo/DesignSetup/r1-ospf.conf here]. You may find the interface information in the file is different from what you see on your `router-1`. 95 It's highly recommended that make sure you double check whether you have the interface information correct in the `ospfd.conf` on `router-1` before you start `xorp`. 95 96 96 97 To do that create the `/etc/xorp` directory: … … 98 99 sudo mkdir /etc/xorp 99 100 }}} 101 100 102 Then create and edit the file using your favorite editor: 101 103 {{{