Changes between Version 1 and Version 2 of GENIExperimenter/Tutorials/SystematicExprCaseStudy/ScalingUp/Execute


Ignore:
Timestamp:
08/13/14 11:56:17 (10 years ago)
Author:
xliu@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIExperimenter/Tutorials/SystematicExprCaseStudy/ScalingUp/Execute

    v1 v2  
    3030= 3.  End-to-End Validation =
    3131
    32 The RSpec file ''4node-stitching.rspec'' is modified from ''4node-final.rspec'' created in Step II, so all software has been installed to the slivers already. Open two terminals, and login to the client and server, respectively.
     32The RSpec file `4node-stitching.rspec` is modified from `4node-final.rspec` created in Step II, so all software has been installed to the slivers already. Open two terminals, and login to the `client` and `server`, respectively.
    3333
    34 Run ping and traceroute from the client to the server
     34Run `ping` and `traceroute` from the `client` to the `server`
    3535
    3636{{{
     
    5454}}}
    5555
    56 From the traceroute result, we found that the delay between the client and router-1, the delay between router-3 and the server were very small (about 0.5ms), this is because the end host and the associated router are from the same aggregate. However, the delay between router-1 and router-2 was about 38ms, and this reflected the delay between the aggregate located at Wisconsin and the aggregate located at New York City, and this shows the delay for the stitched link.
     56From the `traceroute` result, we found that the delay between the `client` and `router-1`, the delay between `router-3` and the `server` were very small (about 0.5ms), this is because the end host and the associated router are from the same aggregate. However, the delay between `router-1` and `router-2` was about 38ms, and this reflected the delay between the aggregate located at Wisconsin and the aggregate located at New York City, and this shows the delay of the stitched link.
    5757
    5858