Changes between Version 10 and Version 11 of GENIExperimenter/Tutorials/StitchingTutorial/DesignSetup
- Timestamp:
- 03/13/14 12:35:40 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/StitchingTutorial/DesignSetup
v10 v11 51 51 To get to the above topology, we must make changes to the resources imported into Flack. We will now modify ''"right-client"'' to become part of a different rack aggregate and then modify its link to be a stitched link. 52 52 53 '''8.''' Click on the ''"right-client"'' VM information button [[Image(GENIExperimenter/Graphics:info.jpg)]].53 '''8.''' Click on the ''"right-client"'' VM information button [[Image(GENIExperimenter/Graphics:info.jpg)]]. 54 54 55 55 '''9.''' In the ''"right-client"'' details panel look for the ''"Manager"'' pull-down. Modify the aggregate to be the second aggregate manager that was assigned to you at the beginning of the tutorial; do not use the aggregate used earlier. Click on the ''"Apply"'' button. (If you are running this tutorial on your own, you may use any other site aggregate found on the [http://groups.geni.net/geni/wiki/GeniNetworkStitchingSites GENI Network Stitching Sites] page.) 56 56 57 '''10.''' You will now see that the link from the ''"server"'' VM to ''"right-client"'' VM is now a gre-tunnel link. Select the gre-tunnel link information button [[Image(GENIExperimenter/Graphics:info.jpg)]] to modify the link type to ''"stitched"'' and click ''"Apply"'' button.57 '''10.''' You will now see that the link from the ''"server"'' VM to ''"right-client"'' VM is now a gre-tunnel link. Select the gre-tunnel link information button [[Image(GENIExperimenter/Graphics:info.jpg)]] to modify the link type to ''"stitched"'' and click ''"Apply"'' button. 58 58 59 59 [[Image(GENIExperimenter/Graphics:gre-to-stitched.jpg)]]