wiki:GENIExperimenter/Tutorials/SimpleOpenFlowTutorial

Version 4 (modified by nriga@bbn.com, 7 years ago) (diff)

--

Simple OpenFlow Tutorial with OVS Using the GENI Portal

Experiment Description

In this tutorial we are going to use a simple topology using OVS as an OpenFlow switch connected to three hosts. OVS is a software switch running on a compute resource. The other three hosts can only communicate through the OVS switch. Although the controller for the switch can run anywhere in the internet, we are going to run it on the same host as the OVS switch to minimize the required resources. We are going to use this setup to write simple controllers and experiment with the capabilities of OpenFlow. For this tutorial we are going to use the PoX controller, this is just an example of many controllers. The OVS switch that we use runs in userspace which although not optimized for performance, it is enough for getting acquainted with OpenFlow.

Prerequisites

In order to participate in this tutorial you need to have an account at an InCommon institution. If you don't already have an account please follow [these instructions].

Make sure you know which institution will provide you access to GENI and the username and password you need to authenticate. If you don't know, please let us know.

Make sure that you have access to your email.

Tutorial Instructions

Design/Setup
Execute
Finish