Changes between Version 5 and Version 6 of GENIExperimenter/Tutorials/PortalSimpleLayer2ExampleOneAM/ExecuteExperiment

Timestamp:

03/19/13 07:17:02 (11 years ago)

Author:

Aaron Helsinger

Comment:

--

GENIExperimenter/Tutorials/PortalSimpleLayer2ExampleOneAM/ExecuteExperiment

@@ -89 +89 @@
       * The '''data interface'''. This is the interface that is used for sending experimental traffic. This is the interface that connects to the other hosts of your experiment through GENI. The links between these interfaces are the ones that allow you to run non-IP experiments. The data interface is the one that has an IP that starts with 10.
     i. Fill in the worksheet, noting the name and  IP address of the control and of the data interfaces for each node.  
-    '''Note''': The "client" is the node in Utah and the "server" is the node at the GPO (in Massachusetts).  The command prompt on each node says "client" or "server" respectively. 
+    '''Note''': The command prompt on each node says "client" or "server" respectively. 
     i. When we reserved the resources, we did not specify the IP address for the data interfaces.  Instead, do this now.  Configure the IP address on the data interface of each node using the desired data IP address from the worksheet : 
 {{{