Changes between Version 9 and Version 10 of GENIExperimenter/Tutorials/PortalOmniExample/ObtainResources


Ignore:
Timestamp:
07/05/13 14:29:50 (6 years ago)
Author:
Gary Wong
Comment:

Split the configuration and execution of Omni into two steps.

Legend:

Unmodified
Added
Removed
Modified
  • GENIExperimenter/Tutorials/PortalOmniExample/ObtainResources

    v9 v10  
    208208== 5. Instantiate the new experiment using Omni ==
    209209
    210 For this step, we'll change the approach a bit and switch to a new client tool: the command line Omni client.  If you haven't yet configured Omni, please follow [http://trac.gpolab.bbn.com/gcf/wiki/OmniConfigure/Automatic these instructions] now.
     210For this step, we'll change the approach a bit and switch to a new client tool: the command line Omni client.
     211
     212=== 5.1. Configure Omni ===
     213
     214Please follow [http://trac.gpolab.bbn.com/gcf/wiki/OmniConfigure/Automatic these instructions] now.
     215
     216{{{FIXME include custom instructions inline, instead of generic instructions by reference}}}
     217
     218=== 5.2. Send the {{{CreateSliver}}} request to the AM ===
    211219
    212220Once Omni is installed and configured, bringing up the sliver you designed earlier is a one-step procedure.  Just enter the command: