Changes between Version 24 and Version 25 of GENIExperimenter/Tutorials/OpenFlowRyu/Execute

Timestamp:

05/22/17 13:29:41 (7 years ago)

Author:

Nabeel Akhtar

Comment:

--

GENIExperimenter/Tutorials/OpenFlowRyu/Execute

@@ -196 +196 @@
 
   1. '''Use the interfaces that are connected to `host2` and  `host3`. '''
-    * Software Switch (OVS): If you have not noted them down you can use the manifest and the MAC address of the interfaces (ovs:if1 and ovs:if2) to figure this out. But you should have noted down the interfaces in Section 2 when you were configuring the software switch. Run tcpdump on these interfaces; one in each of the two ovs terminals you opened. This will allow you to see all traffic going out the interfaces.
+    * Software Switch (OVS): You should have noted down the interfaces for host2 and host3 in section 2a. If you have not noted the interfaces for host2 and host3 down (in section 2a), you can run tcpdump on OVS interfaces to figure out the interfaces for host2 and host3. This will allow you to see all traffic going out the interfaces.
     [[BR]]