Changes between Version 14 and Version 15 of GENIExperimenter/Tutorials/OpenFlowOVS
- Timestamp:
- 09/18/13 12:54:48 (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/OpenFlowOVS
v14 v15 7 7 3. '''Proxy Controller'''. Write a controller that will diverge all traffic destined to host A, TCP port X to host B, TCP port Y 8 8 9 In this tutorial we are going to use [ http://www.openswitch.orgOpen vSwitch (OVS)] as an OpenFlow switch connected to three hosts.9 In this tutorial we are going to use [ http://openvswitch.org/ Open vSwitch (OVS)] as an OpenFlow switch connected to three hosts. 10 10 OVS is a software switch running on a compute resource. The other three hosts can only communicate through the OVS switch. Although the controller for the switch can run anywhere in the internet, we are going to run it on the same host as the OVS switch to minimize the required resources. 11 11 For this tutorial we are going to use the [http://www.noxrepo.org/pox/about-pox/ PoX controller], this is just an example of [wiki:OpenFlow/Controllers many controllers]. … … 25 25 26 26 == Tools: == 27 - [ http://www.openswitch.org OVS OpenVSwitch]. OVS will already be installed in your host.27 - [ http://openvswitch.org/ Open vSwitch (OVS)]. OVS will already be installed in your host. 28 28 - [http://www.noxrepo.org/pox/about-pox/ PoX controller]. PoX controller will already be installed in your host. 29 29