Changes between Version 97 and Version 98 of GENIExperimenter/Tutorials/OpenFlowOVS/Execute
- Timestamp:
- 11/05/14 10:04:56 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/OpenFlowOVS/Execute
v97 v98 141 141 '' Note: "l2" above uses the letter `l` as in level and is not the number one. And you should wait for the '''INFO ... connected''' line to ensure that the switch and the controller are communicating.''[[BR]] 142 142 143 '' Note: In the event that you need to move the port of your controller, this is the command - sudo ./pox.py --verbose openflow.of_01 --port=443 forwarding.l2_learning - Do not forget to tell the ovs switch that the controller will be listening on this new port, i.e change 6633 to 443 .''143 '' Note: In the event that you need to move the port of your controller, this is the command - sudo ./pox.py --verbose openflow.of_01 --port=443 forwarding.l2_learning - Do not forget to tell the ovs switch that the controller will be listening on this new port, i.e change 6633 to 443 in Step 2c.'' 144 144 145 145 3. Now go to terminal of `host1` and ping `host2`: