Changes between Version 68 and Version 69 of GENIExperimenter/Tutorials/OpenFlowOVS/Execute

Timestamp:

07/22/14 08:22:50 (10 years ago)

Author:

nriga@bbn.com

Comment:

--

GENIExperimenter/Tutorials/OpenFlowOVS/Execute

@@ -107 +107 @@
 == Step 3. Execute Experiment ==
 
-Now that our switch is up and running we are ready to start working on our controller. For this tutorial we are going to use the [http://www.noxrepo.org/pox/about-pox/ POX controller]. The software is already installed in the OVS host for running POX and can also be found [http://www.gpolab.bbn.com/experiment-support/OpenFlowOVS/of-ovs.tar.gz here]. 
+Now that our switch is up and running we are ready to start working on our controller. For this tutorial we are going to use the [http://www.noxrepo.org/pox/about-pox/ POX controller]. The software is already installed in the controller host for running POX and can also be found [http://www.gpolab.bbn.com/experiment-support/OpenFlowOVS/of-ovs.tar.gz here]. 
 
 === 3a. Login to your hosts ===
@@ -122 +122 @@
   }}}
 
-  2. We have installed the POX controller under `/tmp/pox` on the OVS host. POX comes with a set of example modules that you can use out of the box. One of the modules is a learning switch.  Let's start the learning switch controller which is already available:
+  2. We have installed the POX controller under `/tmp/pox` on the controller host. POX comes with a set of example modules that you can use out of the box. One of the modules is a learning switch.  Let's start the learning switch controller which is already available:
   {{{
   cd /tmp/pox