Changes between Version 33 and Version 34 of GENIExperimenter/Tutorials/OpenFlowOVS/Execute


Ignore:
Timestamp:
09/23/13 10:40:39 (10 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIExperimenter/Tutorials/OpenFlowOVS/Execute

    v33 v34  
    6464=== 2c. Point your switch to a controller ===
    6565
    66 An !OpenFlow switch will not forward any packet, unless instructed by a controller. Basically the forwarding table is empty, until an external controller inserts forwarding rules. The !OpenFlow controller communicates with the switch over the control network and it can be anywhere in the! Internet as long as it is reachable by the OVS host. For the purpose of this tutorial and in order to minimize the resources we have reserved we are going to run !OpenFlow controller at the same host as the OVS switch. This is '''merely''' for convenience reasons, the controller could have been anywhere on the Internet.
     66An !OpenFlow switch will not forward any packet, unless instructed by a controller. Basically the forwarding table is empty, until an external controller inserts forwarding rules. The !OpenFlow controller communicates with the switch over the control network and it can be anywhere in the Internet as long as it is reachable by the OVS host. For the purpose of this tutorial and in order to minimize the resources we have reserved we are going to run !OpenFlow controller at the same host as the OVS switch. This is '''merely''' for convenience reasons, the controller could have been anywhere on the Internet.
    6767
    6868In order to point our software !OpenFlow switch to the controller run: