Changes between Version 139 and Version 140 of GENIExperimenter/Tutorials/OpenFlowOVS/Execute
- Timestamp:
- 05/27/15 13:48:31 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/OpenFlowOVS/Execute
v139 v140 44 44 45 45 2. We have installed the POX controller under `/tmp/pox` on the controller host. POX comes with a set of example modules that you can use out of the box. One of the modules is a learning switch. Start the learning switch controller which is already available by running the following two commands: 46 47 48 {{{ 49 #!html 50 51 <table id="Table_01" border="0" cellpadding="5" cellspacing="0"> 52 <tr> 53 <td> 54 <img src="http://trac.gpolab.bbn.com/gcf/raw-attachment/wiki/Graphics/4NotesIcon_512x512.png" width="50" height="50" alt="Note"> 55 </td> 56 <td>If you want to run your controller in a different port other than the default one (6633) then every time you invoke pox you should include: <code>openflow.of_01 --port=<custom_port> </code> e.g. pox.py openflow.of_01 --port=443 --verbose forwarding.l2_learning 57 </td> 58 </tr> 59 </table> 60 }}} 46 61 47 62 {{{