Changes between Version 10 and Version 11 of GENIExperimenter/Tutorials/OpenFlowOVS/Appendix
- Timestamp:
- 07/07/14 18:37:51 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/OpenFlowOVS/Appendix
v10 v11 1 1 = Appendix - Move to HW switches = 2 GENI and FIRE offer access to hardware OpenFlow switches. To enable sharing of the resources in GENI there is a common VLAN that has been setup for all the GENI racks and within this VLAN experimenters can reserve a flowspace based on IP or eth_type. Experimenter can also obtain a private VLAN only for their slice. For this tutorial we are going to use the common VLAN that has been setup. 2 GENI and FIRE offer access to hardware OpenFlow switches. Each OpenFlow switch in most cases can support only one controller. To enable sharing of the resources many times a slicer (FlowVIsor) and an OpenFlow specific AM (FOAM) is used. 3 4 In GENI there is a common VLAN that has been setup for all the GENI racks and within this VLAN experimenters can reserve a flowspace based on IP or eth_type. Experimenter can also obtain a private VLAN only for their slice. For this tutorial we are going to use the common VLAN that has been setup. 3 5 4 6 == !Design/Setup ==