Changes between Version 5 and Version 6 of GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/HW/DesignSetup


Ignore:
Timestamp:
03/01/17 13:41:35 (7 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/HW/DesignSetup

    v5 v6  
    77== Step 1.  Obtain Controller Resources ==
    88
    9    * The topology used in this experiment is the same as the one used in the  [wiki:GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/DesignSetup OpenFlow using OVS with Floodlight] tutorial: Three Virtual Machines (VMs) connected by an !OpenFlow switch. However this tutorial uses A hardware !OpenFlow switch instead of a software OVS switch.
     9* The topology used in this experiment is the same as the one used in the  [wiki:GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/DesignSetup OpenFlow using OVS with Floodlight] tutorial: Three Virtual Machines (VMs) connected by an !OpenFlow switch. However this tutorial uses A hardware !OpenFlow switch instead of a software OVS switch.
    1010
    1111[[Image(GENIExperimenter/Graphics:SimpleHardwareOpenFlow.jpg,40%)]]
    1212
    13    * This experiment requires two slices; one slice for the OpenFlow Controller reservation and a second slice for the network topology that includes the compute resource for the endpoint hosts.
     13* This experiment requires two slices; one slice for the OpenFlow Controller reservation and a second slice for the network topology that includes the compute resource for the endpoint hosts.
    1414
    15    * If you have not reserved a controller yet, make sure to create a slice that will run the !OpenFlow controller by reserving a VM running the controller using the request RSpec:
     15* If you have not reserved a controller yet, make sure to create a slice that will run the !OpenFlow controller by reserving a VM running the controller using the request RSpec:
     16
    1617{{{ https://raw.githubusercontent.com/GENI-NSF/geni-tutorials/master/OVSFloodLight/ControllerCustom_request_rspec.xml}}}
    1718
    18   * Once the controller has been reserved, login to the allocated VM and get the routable IP Address that has been allocated to the controller node. This address will be used in the next step when the hosts topology is requested. If needed, see help on [wiki:HowTo/LoginToNodes how to login].
    19 
     19* Once the controller has been reserved, login to the allocated VM and get the routable IP Address that has been allocated to the controller node. This address will be used in the next step when the hosts topology is requested. If needed, see help on [wiki:HowTo/LoginToNodes how to login].
    2020
    2121