Changes between Version 22 and Version 23 of GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/HW/DesignSetup

Timestamp:

06/29/17 10:35:06 (7 years ago)

Author:

lnevers@bbn.com

Comment:

--

GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/HW/DesignSetup

@@ -31 +31 @@
 GENI offers access to hardware !OpenFlow switches, which in most cases can support only one controller.  On the InstaGENI racks the switch is sliced based on VLANs, so each VLAN is its own virtual datapath, thus allowing multiple OF experiments. To force the  links between the endpoint host VMs to go through the rack's !OpenFlow switch, we must request that each endpoint host be on a separate VM Server host in the rack.  The RSpecs '''bind''' each endpoint hosts to a separate Xen VM server and specify the location of your controller.  
 
-If you are attending a tutorial, use the site and IP network that was given to you on your worksheet. If you are doing this at home, choose a site from : `clemson, cornell,  kansas, uky, max, stanford or wisconsin`.  
-
-In the URLs below, replace the <AGGREGATE-NAME> with the name of the site you are using (clemson, cornell,  kansas, uky, max, stanford or wisconsin). To peruse available RSpecs for the second slice, you can take a look at the [https://raw.githubusercontent.com/GENI-NSF/geni-tutorials/master/OpenFlowHW/pvtVlan/ available request RSpecs]. 
-
-Make sure to download the '' '''raw''' '' version of the RSpec you choose.  For example, if you are working with max-ig, then you can get the sample RSPec as follows:
+If you are attending a tutorial, use the site and IP network that was given to you on your worksheet. If you not in a tutorial session, then choose a site from: `clemson, cornell,  kansas, uky, max, stanford or wisconsin`. [https://raw.githubusercontent.com/GENI-NSF/geni-tutorials/master/OpenFlowHW/pvtVlan/ Request RSpecs are available] for the second slice. Take a look at the [https://raw.githubusercontent.com/GENI-NSF/geni-tutorials/master/OpenFlowHW/pvtVlan/ available request RSpecs] and make sure to download the '' '''raw''' '' version of the RSpec you choose.  You may also download the selected rspec as follows:
 
 {{{