Changes between Version 1 and Version 2 of GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/Execute


Ignore:
Timestamp:
10/30/16 01:35:50 (7 years ago)
Author:
pjayanth@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/Execute

    v1 v2  
    1818== Step 3. Execute Experiment ==
    1919
    20 Now that the switch is up and running we are ready to start working on the controller. For this tutorial we are going to use the [http://www.noxrepo.org/pox/about-pox/ POX controller]. The software is already installed in the controller host for running POX and can also be found [http://www.gpolab.bbn.com/experiment-support/OpenFlowOVS/of-ovs.tar.gz here].
     20Now that the switch is up and running we are ready to start working on the controller. For this tutorial we are going to use the [https://floodlight.atlassian.net/wiki/spaces/floodlightcontroller Floodlight Controller]. We installed the software for running Floodlight in the controller host in [wiki:GENIExperimenter/Tutorials/OpenFlowOVS-Floodlight/DesignSetup#con Configure the Floodlight Controller] section.
    2121
    2222=== 3a. Login to your hosts ===