Context Navigation

OpenFlowNetworkDevices

v8	v9
92	92	<li> Name your slice something like <b>xxxopenflow</b> (where xxx are your initials)<br></li>
93	93	<li> Once the slice page loads, click the <b> Add Resources </b> button placed at the top left part of the screen. <br> <b>NOTE:</b> If you get a warning about not having uploaded ssh keys just follow the instructions on providing an ssh key before you proceed.</li>
94		<li> In the <b> Choose RSpec </b> section, choose the <b> Hello GENI </b> choice, which should contain: <a href="http://groups.geni.net/geni/raw-attachment/wiki/GENIExperimenter/Tutorials/OpenFlowNetworkDevices/openflow-nat-fw-combo.rspec" target="_blank"> http://www.gpolab.bbn.com/exp/HelloGENI/hellogeni.rspec</a>. </li>
	94	<li> In the <b> Choose RSpec </b> section, choose the <b>FW and NAT</b> choice, which should contain: <a href="http://groups.geni.net/geni/raw-attachment/wiki/GENIExperimenter/Tutorials/OpenFlowNetworkDevices/openflow-nat-fw-combo.rspec" target="_blank"> http://groups.geni.net/geni/raw-attachment/wiki/GENIExperimenter/Tutorials/OpenFlowNetworkDevices/openflow-nat-fw-combo.rspec</a>. </li>
95	95	<li> You will need to choose an aggregate where you want this topology to be instantiated. Click on the <b> Site 0 </b> box and a panel on the left side of the canvas will appear. Choose any aggregate with <i>InstaGENI</i> in it's name. </li>
96	96	<li> Click on the <b> Reserve Resources </b> button on them bottom left part of the screen. </li>