Changes between Version 8 and Version 9 of GENIExperimenter/Tutorials/OpenFlowHW/DesignSetup
- Timestamp:
- 12/10/14 15:42:17 (9 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/OpenFlowHW/DesignSetup
v8 v9 75 75 76 76 == Step 2. Configure and Initialize == 77 === Useful tips === 77 78 To get ready for the tutorial you will need to have the following windows open: 79 * one window with ssh into the controller 80 * one window with ssh into host1 81 * two windows with ssh into host2 82 * one window with ssh into host3 83 84 Depending on which tool and OS you are using there is a slightly different process for logging in. If you don't know how to SSH to your reserved hosts take a look in [wiki:HowTo/LoginToNodes this page.] 85 86 === 2a. Configure the Hardware Switch: Useful Tips === 78 87 ==== Which port is connected to which host ==== 79 88 Run the learning pox controller with debug on ''(--verbose)'' (use the command from the OVS tutorial) and start a ping from host1 to host2 and host3. Notice that the printout of pox will have lines like: