Changes between Version 14 and Version 15 of GENIExperimenter/Tutorials/NFV/Ryu


Ignore:
Timestamp:
05/17/17 21:11:52 (7 years ago)
Author:
matta@cs.bu.edu
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GENIExperimenter/Tutorials/NFV/Ryu

    v14 v15  
    1313      - First complete steps 1-3 in this [wiki:GENIExperimenter/Tutorials/NFV/DesignSetup page].
    1414      - The Ryu controller should be installed on your controller node (reserved in Step 3.1). You can verify it by running the following command on the controller node. [[BR]]
    15       '''/tmp/ryu/bin/ryu-manager --verbose /tmp/ryu/ryu/app/simple_switch.py'''  [[BR]] If Ryu is installed correctly, you should see the following output:
     15      '''/tmp/ryu/bin/ryu-manager --verbose /tmp/ryu/ryu/app/simple_switch.py'''  [[BR]] If Ryu is installed correctly, you should see an output like this:
    1616
    1717