Changes between Version 54 and Version 55 of GENIExperimenter/Tutorials/NFV/Ryu/HandlingIntrusionwithRyu-portscanning

Timestamp:

11/01/17 16:24:00 (6 years ago)

Author:

Nabeel Akhtar

Comment:

--

GENIExperimenter/Tutorials/NFV/Ryu/HandlingIntrusionwithRyu-portscanning

@@ -12 +12 @@
 
 
+''' NOTE: If you have done experiment 2 or experiment 3, you can skip steps 1-3 below. '''
+
+
 == (1) RINA Distributed Application == 
+(Same as Part (1) in Experiment 2 and Experiment 3)
 
 The RINA distributed application collects the CPU load of VNF1 and VNF2, as well as any Snort alerts generated by the Snort applications running on VNF1 and VNF2. These Snort alerts are collected on the Controller node and saved in file /tmp/snortalerts by the RINA distributed application.
@@ -129 +133 @@
 
 == (2) PI Controller ==
-(Same as Part (2) PI Controller in [wiki:GENIExperimenter/Tutorials/NFV/Ryu/LoadBalancePIwithRyu Experiment 2] and Experiment 3. )
+(Same as Part (2) in Experiment 2 and Experiment 3)
 
 {{{
@@ -196 +200 @@
 
 == (3) PI-based Ryu Controller ==
-(Same as Part (3) PI-based Ryu Controller in [wiki:GENIExperimenter/Tutorials/NFV/Ryu/LoadBalancePIwithRyu Experiment 2]. )
+(Same as Part (3) in Experiment 2 and Experiment 3)
 
  Now we will run the Ryu controller that will get the load balancing decision from the PI-controller and direct the flows accordingly.