Changes between Version 33 and Version 34 of GENIExperimenter/Tutorials/NFV/Ryu/HandlingIntrusionwithRyu-portscanning

Timestamp:

10/30/17 18:19:42 (6 years ago)

Author:

Nabeel Akhtar

Comment:

--

GENIExperimenter/Tutorials/NFV/Ryu/HandlingIntrusionwithRyu-portscanning

@@ -337 +337 @@
 
 
-To re-run the experiment, you just need to remove ''/tmp/attacker.txt'' and ''/tmp/snortalert'' files on the controller node. Now, re-run the experiment without load balancer
-
-
-1. Stop PI-controller that we started in (2) above by pressing Ctrl+C
-
-
-2. Make sure the value of X is equal to 0 in file '' ~/Control/PI_controller/NFV_ratio_PI.txt ''. If it is not 0 (zero), open it in nano and make it 0. To open file, use
+We will re-run the experiment without load balancer to see the effects of load balancer. Ideally, you should quickly detect attack using load balancer. 
+To re-run the experiment, you just need to remove ''/tmp/attacker.txt'' and ''/tmp/snortalert'' files on the controller node. Now, re-run the experiment without load balancer, do following
+
+1. Stop PI-controller load balancer that we started in (2) above by pressing Ctrl+C on its terminal window. 
+
+
+2. Make sure the value of X is equal to 0 in file '' ~/Control/PI_controller/NFV_ratio_PI.txt ''. If it is not 0 (zero), open it in editor and make it 0. To open file, use
 
 
 ''' nano ~/Control/PI_controller//NFV_ratio_PI.txt '''
 
+and change it to '' X=0 ''