[[PageOutline]] This page will guide you through your first [http://trac.gpolab.bbn.com/gcf/wiki/Omni Omni] experiment. [http://trac.gpolab.bbn.com/gcf/wiki/Omni Omni] is a command line tool that helps you interact with GENI aggregate managers. The only thing you will need is a GENI account. If you don't already have one, [wiki:SignMeUp sign up!] = 1. Configure Omni with your GENI account = [http://trac.gpolab.bbn.com/gcf/wiki/Omni Omni] is a command-line tool that will help you reserve resources in GENI. Follow these steps to download and configure Omni. {{{ #!html
Omni web page
  1. Download Omni.The Omni client is part of the GENI Control Framework (GCF) software package. Start with downloading GCF .
  2. Install and Configure Omni using these instructions . Unless you have a specific reason not to, please follow the instructions about automatically configuring Omni. For the rest of the instructions, it is assumed that you followed the default configuration of omni. If you have customized it in any way, please adjust the instructions accordingly.
  3. Optional - Add your key to the ssh agent. If there is an ssh agent running on your host add you key to the ssh agent by running:
    ssh-add ~/.ssh/geni_key
}}} 4. '''Verify that you have the necessary credential and key files '''. Run: {{{ ls ~/.ssh ~/.ssl }}} The output looks like : {{{ geni@geni-vm:~$ ls ~/.ssh ~/.ssl /home/geni/.ssh: config geni_key geni_key.pub /home/geni/.ssl: geni_cert_enc.pem geni_cert.pem }}} || geni_cert.pem || Cleartext certificate, i.e. does not require any passphrase || || geni_cert_enc.pem || Encrypted certificate || || geni_key || The private key that you will use to login to the nodes || || geni_key.pub || The corresponding public key that will be uploaded to the nodes || '''Note:''' Depending on the setup of your host you might see more files than the ones listed above. 5. '''Optional - Look around the omni_config file ''' Open the file `~/.gcf/omni_config` using either vim or emacs. Close to the top of the file you will see two parameters called `default_cf` and `users`. Your username should be at least listed in the user section. Look for the sections in the file that are named `[pg]` and `[]`. In the `[]` section, the information need for logging-in to reserved compute resources are provided. It includes your unique user URN and a public key that would be uploaded to the hosts that you reserve. In the `[pg]` section you configure Omni to use your personal information. The cert and the key attribute point to files that we have manually downloaded from pgeni.gpolab.bbn.com. This is equivalent to the Download action of Flack. Another interesting section to look at is the `[aggregate-nicknames]` sections. Flack already knows the URL for all the AMs and present you a list of AMs to choose from using a short, descriptive name. In Omni a user is required to pass the URL for each call to the GENI AM API. In this section the user gets a chance to provide short descriptive names to the URLs that are easier to memorize and use. = 2. Launch your experiment = Now that you have configured Omni we are ready to design our experiment, which going over most of the Omni commands. 1. '''Create a slice'''. The first thing to do when preparing to run a GENI experiment is to create a slice. Name your slice something like '''xxxomni''' (where xxx are your initials). Your slicename in general should be something memorable but '''not''' your username. Type: {{{ omni.py createslice }}} 2. '''Verify that your slice was created'''. Use the `listmyslices` command, of omni: {{{ omni.py listmyslices }}} 3. '''Renew your slice'''. To extend the lifetime of your slice. Type: {{{ omni.py renewslice }}} The slice lifetime is typically short and when your slice expires, all reserved resources at the time are also released. '''Note''': your resources might have a shorter lifetime than your slice. 4. '''See available resources'''. For this experiment we are going to use the Aggregate manager of ProtoGENI in Utah. In order to see what each AM offers you can use the `listresources` command. Type: {{{ omni.py listresources -a pg-utah -o }}} The `-o` option will save the output to a file. The filename is chosen by Omni and printed as part of the output. The output will look like : {{{ geni@geni-VirtualBox:~$ omni.py listresources -a pg-utah -o INFO:omni:Loading config file /home/geni/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Saving output to a file. INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Listed resources on 1 out of 1 possible aggregates. INFO:omni:Writing to 'rspec-www-emulab-net-protogeniv2.xml' INFO:omni: ------------------------------------------------------------ INFO:omni: Completed listresources: Options as run: aggregate: ['pg-utah'] framework: pg output: True Args: listresources Result Summary: Queried resources from 1 of 1 aggregate(s). Wrote rspecs from 1 aggregate(s) to 1 file(s) Saved listresources RSpec at 'unspecified_AM_URN' (url 'https://www.emulab.net/protogeni/xmlrpc/am/2.0') to file rspec-www-emulab-net-protogeniv2.xml; INFO:omni: ============================================================ }}} In the last line of the output Omni will tell you the name of the file that output is saved at. In the example above this would be `rspec-www-emulab-net-protogeniv2.xml`. This file is a [wiki:GENIExperimenter/RSpecs Resource SPECification document(RSpec)], and in particular an advertisement rspec. Open the file that Omni saved and just take a look to see how an advertisement RSpec looks like. In order to see only available resources type: {{{ omni.py listresources -a pg-utah --available -o }}} 5. '''Reserve resources'''. To be able to reserve resources you will need to craft a [wiki:GENIExperimenter/RSpecs request rspec]. For this example we have created the rspec and made it available for you to use. Type: {{{ omni.py createsliver -a pg-utah http://www.gpolab.bbn.com/experiment-support/HelloGENI/hellogeni.rspec }}} 6. '''See the reserved resources'''. You can use the `listresources` command, to see what resources are reserved at an Aggregate. {{{ omni.py listresources -a pg-utah }}} 7. '''Optional- Extend the lifetime of your reservation'''. The lifetime of your reservation can never exceed the lifetime of your slice and is usually set to a default value. For the purpose of this exercise you don't need to renew your reservation. But if you wanted to do this this is what the command would look like: {{{ omni.py renewsliver -a pg-utah }}} 8. '''Check the status of your resources'''. Type: {{{ omni.py sliverstatus -a pg-utah }}} The `sliverstatus` command reports the status of each individual resource that you reserved as well as the status of your overall GENI sliver. The status reported usually reflects the status of your resource, for example if you hav reserved a host, then status `ready` means that the host is booted and ready, i.e. you can login to it. When the status is `ready` for the whole sliver we are ready to continue to the next step. = 3. View your results = For this example experiment we used the install script facility to automatically install the necessary software and kick-off the experiment. In this very simple setup, we have installed and launched a [http://en.wikipedia.org/wiki/Web_server web server] as well as an [http://en.wikipedia.org/wiki/Iperf iperf server], on the server host. On the client, we have started some processes to test both of these services. To view the results of this experiment: {{{ #!html
  1. After the sliverstatus command tells you that your resources are ready, we should visit the running webserver . In order to do that we need to know which machine was assigned to be our server host. This information is part of the sliverstatus command but it is hard to locate. Omni comes with a script that makes it easy to gather all the information for accessing your hosts. In the terminal run:

    readyToLogin.py -a pg-utah <slicename>
readyToLogin snapshot
    The script will return the actual command that you would need to use for logging in. However we don't need this information right now. At the end of the script find the information that corresponds to the server host, and see what host was reserved (this will be the hostname after your username in the ssh command line, it should look like pcxxx.emulab.net ).
Hello GENI index
  1. Start a web browser and in the location bar type: http://<hostname> .
  2. When the page loads, click the webserver statistics link to look at statistics. Refresh the page a couple of times to see how
    the statistics change as the client requests documents.
  3. Click the iperf logs link to see the statistics from the iperf transfers.
}}} 5. ''' Optional: Manually generate traffic ''' While conducting experiments in GENI, you will often want to run commands directly on the nodes. In this optional step, you will log in to a node and issue commands directly to it. * Follow [wiki:HowTo/LoginToNodes these instructions] and log in to the client node. You can also simply copy and paste the command as it was printed in the `readyToLogin` output. * When you have successfully logged in, run this command {{{ iperf -c server -P 2 }}} This task shouldn't take more than 30 seconds. Change the number after the ` -P ` argument and watch how the performance is affected while you change the number of parallel TCP connections. * Scroll all the way down the server iperf log, and look at the logs for your transfers = 4. Cleanup = After you are done with your experiment, you should always release your resources so that other experimenters can use the resources. 1. In the terminal, where you have been running your omni commands do: {{{ omni.py deletesliver -a pg-utah }}}