Changes between Version 9 and Version 10 of GENIExperimenter/Tutorials/GettingStarted_PartII_Labwiki_PartII/DesignSetup

Timestamp:

05/24/15 21:28:04 (9 years ago)

Author:

sedwards@bbn.com

Comment:

--

GENIExperimenter/Tutorials/GettingStarted_PartII_Labwiki_PartII/DesignSetup

@@ -72 +72 @@
    <ol type='a'>
       <li>Drag a second site onto the canvas.</li>
+   </ol>
+</td>
+<td>
+<img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/GENIExperimenter/Tutorials/2_twoagg.png" alt="route topology"  align="center" width="350" title="topology" /> 
+<br/>
+<b>Figure 2</b> Add a second site.
+</td>
+</tr>
+<tr><td>
+   <ol type='a'>
       <li>Drag one of the switches and the three attached hosts to the second site.</li>
       <li>Click on the unlabeled box in the middle of the link.  Select "Stitched Ethernet" as the link type.</li>
@@ -77 +87 @@
 </td>
 <td>
-<img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/Tutorials/Stitching/Procedure/SetLinkType.png" alt="route topology"  align="center" width="350" title="topology" /> 
+<img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/GENIExperimenter/Tutorials/2b_setlinktype.png" alt="route topology"  align="center" width="350" title="topology" /> 
 <br/>
-<b>Figure 2</b> Set the Link Type on the inter-aggregate link.
+<b>Figure 3</b> Set the Link Type on the inter-aggregate link.
 </td>
 </tr>
@@ -104 +114 @@
 </td>
 <td>
-<img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/Tutorials/Stitching/Procedure/BoundStitched.png" alt="route topology"  align="center" width="350" title="topology" /> 
+<img border="0" src="http://groups.geni.net/geni/raw-attachment/wiki/GENIExperimenter/Tutorials/3_bind.png" alt="route topology"  align="center" width="350" title="topology" /> 
 <br/>
-<b>Figure 3</b> Bind the sites.  The aggregate choices will be limited based on the link type.
+<b>Figure 4</b> Bind the sites.  The aggregate choices will be limited based on the link type.
 </td>
 </tr>