412 | | <li>Now set the properties of the links in your topology: IP addresses, net masks and link capacity. To do this click on the i button on <i>link0</i>. Then go to the <i>Interfaces</i> tab and set the IP addresses and masks as specified in Table 3-4 below.</li> |
| 412 | <li>Now set the properties of the links in your topology: IP addresses, net masks and link capacity. To do this click on the i button on <i>link0</i>. </li> |
| 413 | <li>Specify the IP addresses and netmasks by switching to the Interfaces tab and enter the information from Table 3-4. |
| 414 | Click "Apply" when you are done.</li> |