411 | | <ol type='a' start='5'> |
412 | | |
413 | | <li>For the link, go to the <i>Interfaces</i> tab and set the IP addresses and masks as specified in the table below.</li> |
414 | | <li>Switch to the properties tab and set the link’s bandwidth 100Mb/s Set capacity: 100000000 (note: Flack will report that this is 100Gb/s but it is actually 100Mb/s) |
| 411 | <ol type='a' start='4'> |
| 412 | <li>Now set the properties of the links in your topology: IP addresses, net masks and link capacity. To do this click on the i button on <i>link0</i>. Then go to the <i>Interfaces</i> tab and set the IP addresses and masks as specified in Table 3-4 below.</li> |
| 413 | <li>Switch to the Properties tab and set the link’s capacity to 100Mbps by entering 100000000 in the box labeled Capacity. (Note: Flack will report that this is 100Gb/s but it is actually 100Mb/s.) |