Changes between Version 30 and Version 31 of GENIExperimenter/Tutorials/GettingStarted_PartII_Hadoop/Procedure/DesignSetup
- Timestamp:
- 03/09/14 12:59:27 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/GettingStarted_PartII_Hadoop/Procedure/DesignSetup
v30 v31 261 261 </table> 262 262 </td></tr> 263 264 265 <tr><td> 266 <ol type='a' start='5'> 267 268 <li>For the link, go to the <i>Interfaces</i> tab and set the IP addresses and masks as specified in the table below.</li> 269 <li>Switch to the properties tab and set the link’s bandwidth 100Mb/s Set capacity: 100000000 (note: Flack will report that this is 100Gb/s but it is actually 100Mb/s) 270 </li> 271 </ol> 272 </td> 273 <td> 274 <img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/HadoopInASlice/ObtainResources/edit-link-properties.png?format=raw" width='400'/> 275 <br /> 276 <b>Figure 3-5</b> <i>Configure the link bandwidth</i> 277 </td> 278 </tr> 279 </table> 263 </table> 264 280 265 281 266 … … 419 404 </tr> 420 405 </table> 406 407 408 409 <table> 410 <tr><td> 411 <ol type='a' start='5'> 412 413 <li>For the link, go to the <i>Interfaces</i> tab and set the IP addresses and masks as specified in the table below.</li> 414 <li>Switch to the properties tab and set the link’s bandwidth 100Mb/s Set capacity: 100000000 (note: Flack will report that this is 100Gb/s but it is actually 100Mb/s) 415 </li> 416 </ol> 417 </td> 418 <td> 419 <img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/HadoopInASlice/ObtainResources/edit-link-properties.png?format=raw" width='400'/> 420 <br /> 421 <b>Figure 3-5</b> <i>Configure the link bandwidth</i> 422 </td> 423 </tr> 424 </table> 425 421 426 422 427 <table>