Changes between Version 2 and Version 3 of GENIExperimenter/Tutorials/GREESC13/PortalSimpleLayer2Example/ExecuteExperiment


Ignore:
Timestamp:
06/06/13 11:14:19 (11 years ago)
Author:
sedwards@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIExperimenter/Tutorials/GREESC13/PortalSimpleLayer2Example/ExecuteExperiment

    v2 v3  
    8989      * The '''data interface'''. This is the interface that is used for sending experimental traffic. This is the interface that connects to the other hosts of your experiment through GENI. The links between these interfaces are the ones that allow you to run non-IP experiments. The data interface is the one that has an IP that starts with 10.
    9090    i. Fill in the worksheet, noting the name and  IP address of the control and of the data interfaces for each node. 
    91     '''Note''': The "client" is the node in Utah and the "server" is the node at the GPO (in Massachusetts).  The command prompt on each node says "client" or "server" respectively.
     91{{{
     92#!html
     93
     94<table id="Table_02" border="0" cellpadding="5" cellspacing="0">
     95        <tr>
     96                <td>
     97                        <img src="http://groups.geni.net/syseng/attachment/wiki/JOhrenSandbox/OnlineTutorialTemplate/OtherIcons/4NotesIcon_512x512.JPG?format=raw" width="50" height="50" alt="Note">
     98               </td>
     99               <td>
     100                    The "client" is the node in Utah and the "server" is the node at the GPO (in Massachusetts).  The command prompt on each node says "client" or "server" respectively.
     101               </td>
     102        </tr>
     103</table>
     104}}} 
    92105    i. When we reserved the resources, we did not specify the IP address for the data interfaces.  Instead, do this now.  Configure the IP address on the data interface of each node using the desired data IP address from the worksheet :
    93106{{{