wiki:GENIExperimenter/Tutorials/GENIExperimentEngine/Execute

Version 35 (modified by acb@cs.princeton.edu, 5 years ago) (diff)

--

Get to Know the GENI Experiment Engine

Hello GENI index Hello GENI index Hello GENI index

STEPS FOR EXECUTING EXERCISE


Your goal in this tutorial is to fetch a parameterized URL on each node of your slicelet:

http://www.lively-web.org/nodejs/GEETutorial/helloWorld?slice=<slice name>&name=<container name>&ip=<IP of host>&local=<IP of container>&lat=<latitude of host>&lng=<longitude of container>

This page will log each of your queries, and you can check that all your nodes were successfully able to run the query.

We will work up to this goal through hands-on learning with Ansible.


1. Experiment with Ansible


1. Create an Ansible playbook to download a parameterized URL from each node

Think about how you are going to solve the problems of this tutorial. You need to collect several pieces of information on each node: the container name, the IP of the host (i.e., the VM hosting the container), the IP of the container, and the latitude and longitude of the host. You then need to fetch a custom URL containing this information from each host.

The following subsections provide more information on each step in this process.

(a) Get the container's FQDN

Look at the variables collected by Ansible's setup module (step 1(c) above). Find one that holds the container's fully-qualified domain name (e.g., slice347.pcvm1-1.instageni.iu.edu) and dump it using a debug task.

(b) Get the container IP address

Look at the variables collected by Ansible's setup module (step 1(c) above). Find one that holds the container IP address and dump it using a debug task.

(c) Get the control host name

Look at the variables collected by Ansible's setup module (step 1(c) above). Find one that holds the control host's FQDN (HINT: it begins with pcvm) and dump it using a debug task. You'll need this for the next step.

(d) Get the host's public IP address

The IP address visible inside the slicelet (as reported in the variable ansible_eth0.ipv4.address) is a private address -- it is not the control address of the host. To discover the public IP address of the node, run dig +short <control host name>.

Pro Tip: The ansible command-line tool is a good way to try out Ansible tasks before putting them in your playbook. Look at the examples in part 1 above.
Pro Tip: Usually in an Ansible playbook you reference a variable by surrounding it in double curly brackets: {{ ansible_eth0.ipv4.address }}. You can see examples of how variables are referenced in tasks in this playbook.
Pro Tip: When you run an Ansible command in a playbook, you can save the output into a new variable using register: varname Then you can retrieve the value later in the playbook using {{ varname }} or, for shell command output, {{ varname.stdout }}. You can see an example of how to register a variable in this playbook.

(e) Get the latitude and longitude for each node

To map the host's control IP address obtained in the previous step to the latitude and longitude for each node, use the geoiplookup tool, provided by package geoip-bin.

$ geoiplookup -f <data file> <ip address>

where <data file> is the database of IP addresses and locations. You can find a good one at: http://geolite.maxmind.com/download/geoip/database/GeoLiteCity.dat.gz, which you’ll have to download to each node and unzip.

Pro Tip: The Ansible script module can be used to run arbitrary scripts in your slicelet. See: http://docs.ansible.com/script_module.html
Pro Tip: Not all the resources you may need are installed on the nodes! The apt Ansible module is useful for installing packages; see: http://docs.ansible.com/apt_module.html

(f) Fetch the parameterized URL

At this point, you should have enough information to fetch the parameterized URL in the playbook.

Here is an Ansible playbook skeleton to complete. Copy it to a file name gee-tutorial.yaml and fill in the bits marked # INSERT ARGUMENTS HERE based on the instructions in the following subsections.

---
- hosts: nodes
  remote_user: root
  tasks:
  - name: Update apt cache
    shell: apt-get update

  - name: Install python-apt (to work around an Ansible bug)
    shell: apt-get -y install python-apt


  ### (a): Get the container's FQDN ###
  - name: Dump container FQDN
    debug: # INSERT ARGUMENTS HERE


  ### (b):  Get the container IP address ###
  - name: Dump container IP address
    debug: # INSERT ARGUMENTS HERE


  ### (c): Get the control host name ###
  - name: Dump control host name
    debug: # INSERT ARGUMENTS HERE


  ### (d): Get the host's public IP address ###
  - name: Install dnsutils (for dig)
    apt: # INSERT ARGUMENTS HERE

  - name: Get my public IP using 'dig +short'
    shell: # INSERT ARGUMENTS HERE
    register: public_ip

  - name: Dump public_ip variable
    debug: var=public_ip


  ### (e): Get the latitude and longitude for each node ###
  - name: Install geoip-bin (for geoiplookup)
    apt: # INSERT ARGUMENTS HERE

  - name: Download GeoLiteCity DB
    get_url: # INSERT ARGUMENTS HERE

  - name: Unzip GeoLiteCity.dat.gz
    shell: gunzip -f GeoLiteCity.dat.gz

  - name: Run geoiplookup to get latitude
    shell: # INSERT ARGUMENTS HERE
    register: latitude

  - name: Dump latitude variable
    debug: var=latitude

  - name: Run geoiplookup to get longitude
    shell: # INSERT ARGUMENTS HERE
    register: longitude

  - name: Dump longitude variable
    debug: var=longitude


  ### (f): Fetch the parameterized URL ###
  - name: Dump the full URL, to make sure it looks OK 
    debug: msg="http://www.lively-web.org/nodejs/GEETutorial/helloWorld?slice=# INSERT ARGUMENTS HERE"

  - name: Fetch the full URL
    shell: curl "http://www.lively-web.org/nodejs/GEETutorial/helloWorld?slice=# INSERT ARGUMENTS HERE"
Pro Tip: Solve the problem on one node in your slice first, then deploy your solution to the remaining nodes.
Pro Tip: Build your solution a piece at a time. Get each step working before continuing to the next step.

2. Run the playbook

Once you have finished your playbook, run it against all the nodes!

As a data point, our Ansible playbook contained six commands (not including debug commands) and used the apt, shell, and get_url modules.


3. Verify that your playbook worked as expected

Once you have completed the tutorial, you can check where you’ve said hello from at:

http://www.lively-web.org/nodejs/GEETutorial/show_hellos?slice=<your slice>

You should see an entry for each node in your slicelet.


Next: Teardown Experiment

Attachments (2)

Download all attachments as: .zip