Changes between Version 8 and Version 9 of GENIExperimenter/Tutorials/GENIDesktop/aag/install

Timestamp:

05/18/16 16:54:20 (8 years ago)

Author:

carpenter@vis.uky.edu

Comment:

--

GENIExperimenter/Tutorials/GENIDesktop/aag/install

@@ -16 +16 @@
   }}}
  2. '''Setup Shortest Path Flows'''
-  Now we want to make h1 and h2 able to communicate using shortest paths. To do so, you have to load the Flow Install module from the list of modules on the left hand side of your screen. 
+  Now we want to make '''h1''' and '''h2''' able to communicate using shortest paths. To do so, you have to load the '''Flow Install''' module from the list of modules on the left hand side of your screen. 
 
   [[Image(finstall.png)]]
@@ -24 +24 @@
   The second section, '''System-wide SDN Rules''', allows you to automatically set system wide paths.  It can compute shortest paths between all hosts and automatically install the corresponding flow entries at every switch in the path. It can also send ARP Traffic to the controller. We need to handle ARP processing as well in order to be able to communicate between hosts. The controller images loaded in the AAG features include ARP processing modules. Therefore, by checking the ARP processing box we will let the controller handle all ARP requests/responses. 
 
-Check '''Send ARP Traffic to Controller''' and '''Shortest Path Rules'''. Then, click on the '''Initialize''' button. 
+  Check '''Send ARP Traffic to Controller''' and '''Shortest Path Rules'''. Then, click on the '''Initialize''' button once. After a short wait the results will be shown in the '''Output''' box. 
 
   The output message should be: 
@@ -43 +43 @@
 
  3. '''Install Alternate Paths'''
+    The third section of the '''Flow Install''' module 
     1. List Flows