Changes between Version 6 and Version 7 of GENIExperimenter/Tutorials/GENIDesktop/GEC23/jacks


Ignore:
Timestamp:
06/12/15 11:53:27 (9 years ago)
Author:
griff@netlab.uky.edu
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GENIExperimenter/Tutorials/GENIDesktop/GEC23/jacks

    v6 v7  
    33[wiki:GENIExperimenter/Tutorials/GENIDesktop/GEC23#ExercisesTasks Back to GEC23 Tutorial]
    44
    5 Once you have created the slice successfully , you should will be redirected to page that talks with allocating resources. If you plan to use an existing slice with no resources in it, then just click on the slicename in the list of slices you see after you logged in.
    6 
    75
    86== Creating a Slivers using JACKS in the GeniDesktop ==
    97
    10  If using the Advanced view in the Genidesktop. click on the "JACKS" button for the slice you want to add resources. If using the default view or if you just see a list of your slices, click on the slicename you want to add resources to.
     8Once you have created the slice successfully , you will be redirected to a page that will allow you to add resources to your slice.
    119
    1210
    … …  
    1816       <td >
    1917         <ol  type='a'>
    20             <li>Depending upon how you want to add resources to the JACKS Tool, Click on the appropriate button in Figure 1-1. For this example, we will click on <i>"Create New"</i> </li>
     18            <li>Depending upon how you want to add resources to your slice, you will need to click on the appropriate button in Figure 1-1. For this example, we will click on <i>"Create New"</i> which will direct us to the Jacks RSPEC editor </li>
    2119         </ol>
    2220      </td>
    … …  
    6058       <td >
    6159         <ol  type='a' start='7'>
    62             <li>Click the "Site 2" box and select the aggregate that has been assigned to you from the pulldown menu.  The "Reserve Resources" button at the bottom of the pane should now be clickable.</li>
    63             <li>If you would like to save this topology for future use to the GeniDesktop Cloud, click the <b>"Save to Cloud For Future Use"</b> checkbox and fill in the required details.</li>
     60            <li>Click the "Site 2" box and select the aggregate that you have been assigned to (which should be listed on your GEC 23 registration badge).  The "Reserve Resources" button at the bottom of the pane should now be clickable.</li>
     61            <li>If you would like to save this topology for future use with the GeniDesktop Cloud Service, click the <b>"Save to Cloud For Future Use"</b> checkbox and fill in the required details.</li>
    6462            <li>Click the <b>"Allocate Resources using RSPEC"</b> button at the top of the page.</li>
    6563          </ol>
    … …  
    7573       <td >
    7674         <ol  type='a' start='10'>
    77             <li>If your resource reservation was accepted by the Aggregate Managers, you would see something similar to Figure 1-7 followed by Figure 1-8</li>
     75            <li>If your resource reservation is accepted by the Aggregate Managers, you will see something similar to Figure 1-7 followed by Figure 1-8</li>
    7876            <li>The screen then transitions to the the Genidesktop page for that slice where you can perform slice/sliver related operations</li>
    7977          </ol>