Changes between Version 43 and Version 44 of GENIExperimenter/Tutorials/ECE375
- Timestamp:
- 09/10/13 11:31:28 (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIExperimenter/Tutorials/ECE375
v43 v44 66 66 2. Use the linux [http://www.hscripts.com/tutorials/linux-commands/route.html route command] to create static routes that match the routing behavior of the diagram. Include the routing commands in your writeup. 67 67 3. Verify that you have created the intended routing behavior using traceroute. Include the output of the traceroutes commands in your writeup along with screenshots from node A that shows traceroutes for both IP addresses of node C. 68 68 [[BR]][[BR]] 69 69 70 70 '''Note''': Remember that you can use “ifconfig” to determine which Ethernet interface (e.g., eth0) is bound to what IP address at each of the nodes.