5 | | This page illustrates an operational !OpenFlow (OF) example for the [wiki:HowToUseOmni Omni How-to] page. [http://www.openflow.org/ OpenFlow] is used for control of many of the network resources in the GENI backbone and at meso-scale campus locations. Many experimenters can use these GENI resources without learning !OpenFlow. The GENI [mailto:help@geni.net] can help arrange connectivity across your GENI slice, including IP connectivity and/or layer 2 VLANs. |
6 | | |
7 | | For experimenters who desire control over the network switching fabric in their slices, !OpenFlow provides increased flexibility. Your experiment will incorporate an !OpenFlow controller. If you have never written a controller, don't panic. Many experiments can use existing controller code as-is, or with relatively simple modifications. The GPO is available to help design your controller and plan your experiment configuration. Feel free to contact us at [mailto:help@geni.net]. |
8 | | |
9 | | The example captured in this page uses credentials from pgeni.gpolab.bbn.com, the GPO ProtoGENI Clearinghouse, to set up an experiment that includes 3 fictional sites (1 PG and 2 MyPLC nodes). This example assumes that an !OpenFlow Controller, such as NOX, is running on a slice resource, and is available and is accessible to the !FlowVisor instances. In this scenario, two sites are Web Servers and 3 are clients, as shown in the diagram below: |
| 5 | This page illustrates an !OpenFlow (OF) example for the [wiki:HowToUseOmni Omni How-to] page. [http://www.openflow.org/ OpenFlow] is used for the control of the network resources in the GENI backbone and at meso-scale campus locations. Experimenters can use these GENI resources without learning !OpenFlow. The GPO [mailto:help@geni.net] can help arrange connectivity across your GENI slice, including IP connectivity and/or layer 2 VLANs. |
| 6 | |
| 7 | For experimenters who desire control over the network switching fabric in their slices, !OpenFlow provides increased flexibility. Your experiment will incorporate an !OpenFlow controller. Many experimenters use existing controller code as-is, some use controllers with relatively simple modifications, and some experimenters have written their own controller. The GPO is available to help design your controller and plan your experiment configuration. Feel free to contact us at [mailto:help@geni.net]. |
| 8 | |
| 9 | The example captured in this page uses credentials from pgeni.gpolab.bbn.com, the GPO ProtoGENI Clearinghouse, to set up an experiment that includes 3 meso-scale OpenFlow sites (1 PG and 2 MyPLC nodes). This example shows a NOX !OpenFlow Controller running on a slice resource, and is available and is accessible to the FOAM instances. In this scenario, two sites are Web Servers and 3 are clients, as shown in the diagram below: |