- When you open the node information, you should see options like those
in the figure. The controls available to you will vary depending on the
types of the aggregate manager and the component, but many features are
widely available throughout GENI.
- The way we will request installation of the proper software and execution
of our experiment is to add install and execute services.
First, select "+ Add Install Service" as shown. Flack will now
prompt you for an "Archive URL" and a location for installation. For this
experiment, please enter the appropriate URL.
Aggregate Type |
Tarball |
Installation Location |
InstaGENI
|
http://www.gpolab.bbn.com/experiment-support/UnderstandAMAPI/ig/underAMAPI_ig.tar.gz |
/local
|
ExoGENI
|
http://www.gpolab.bbn.com/experiment-support/UnderstandAMAPI/eg/underAMAPI_eg.tar.gz |
/local
|
- Similarly, please use the "+ Add Execute Service" button to request
that the appropriate command.
Aggregate Type |
Client Install Script |
Server Install Script |
Shell |
InstaGENI
|
sudo /local/install-script.sh |
sudo /local/install-script.sh |
sh |
ExoGENI
|
/local/install-client.sh |
/local/install-server.sh |
sh |
| Be very careful when entering this information -- these commands will not
be executed yet, so it will be some time before you will see any relevant
error messages if there is a mistake here. |
- Once both the "install" and "execute" services are specified, please
choose "Apply". Then repeat the procedure to add the same "install" and
"execute" services on the server node.
- Also on the server node, click on the "link" tab
and select "Routable Control IP" as shown in the figure.
|
Figure 3-5 On the Link tab, select the
"Routable Control IP" button.
|