Changes between Version 22 and Version 23 of GENIEducation/SampleAssignments/TcpAssignment/ExerciseLayout/Execute

Timestamp:

12/09/13 23:05:32 (10 years ago)

Author:

Vic Thomas

Comment:

--

GENIEducation/SampleAssignments/TcpAssignment/ExerciseLayout/Execute

@@ -83 +83 @@
  Run an Iperf server on the Left node (see Hint/Guidance section for location of iperf). The Iperf client will be run on the Right node. The duration for an Iperf session (''-t'' option) is 60 seconds unless otherwise mentioned. Note carefully that some exercises require a much longer duration. Ensure that your sliver lifetimes are long enough to capture the duration of your experiment. All of the experiments should be repeated at least a 5 times (especially when the interfaces include random delays or losses) to ensure confidence in the results, as transient conditions can cause significant variations in any individual run.
  
- - 1. Question: What are the goodputs when the Reno and CUBIC algorithms are used on the network with no emulated delay or loss? Which is better?
- - 2. Question: Qualitatively, under what conditions does BIC/CUBIC perform better than Reno’s AIMD?
+ - 1. Question: What are the goodputs when the reno and cubic algorithms are used on the network with no emulated delay or loss? Which is better?
+ - 2. Question: Qualitatively, under what conditions does bic/cubic perform better than Reno’s AIMD?
  - 3. Question: Change the delay of interface L to 300 ms using the following command, and run an Iperf session for 1800 seconds.
    {{{