Changes between Version 3 and Version 4 of GENIEducation/SampleAssignments/OpenFlowAssignment/ForInstructors


Ignore:
Timestamp:
05/22/13 10:08:09 (12 years ago)
Author:
shuang@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIEducation/SampleAssignments/OpenFlowAssignment/ForInstructors

    v3 v4  
    166166    - You may wish to review control theory, as well as TCP congestion control and avoidance principles.
    167167    - Without rebalancing, “correcting” a severe imbalance may be difficult or impossible. For testing purposes, add flows to the path slowly and wait for things to stabilize.
    168     - Some thoughts on reducing the flow count when load balancing via Open- Flow can be found in Wang et al. [12] You are not required to implement these techniques, but may find them helpful.
     168    - Some thoughts on reducing the flow count when load balancing via Open- Flow can be found in [http://dl.acm.org/citation.cfm?id=1972438 Wang et al.] You are not required to implement these techniques, but may find them helpful.
    169169    - Remember that the default OpenFlow policy for your switch or Open vSwitch instance will likely be to send any packets that do not match a flow spec to the controller, so you will have to handle or discard these packets.
    170170    - You will want your load balancer to communicate with the traffic shaping nodes via their administrative IP address, available in the slice manifest.