Changes between Version 20 and Version 21 of GENIEducation/SampleAssignments/IPRouting/Procedure


Ignore:
Timestamp:
09/11/13 14:07:33 (6 years ago)
Author:
nriga@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIEducation/SampleAssignments/IPRouting/Procedure

    v20 v21  
    126126
    127127=== Tips ===
    128 [[Image(GENIExperimenter/Tutorials/Graphics:tip.png, 5%, left)]]
    129     * Remember that you can use “ifconfig” to determine which Ethernet interface (e.g., eth0) is bound to what IP address at each of the nodes.[[BR]]
    130     * In order to enable forwarding of packets on node B you have to execute the following command:
     128[[Image(GENIExperimenter/Tutorials/Graphics:tip.png, 20, left)]]Remember that you can use “ifconfig” to determine which Ethernet interface (e.g., eth0) is bound to what IP address at each of the nodes.
     129
     130[[Image(GENIExperimenter/Tutorials/Graphics:tip.png, 20, left)]]In order to enable forwarding of packets on node B you have to execute the following command:
    131131{{{
    132132echo 1 > /proc/sys/net/ipv4/ip_forward
    133133}}}
    134  * A new slice will always be in its initial state with NO routing set up!
     134
     135[[Image(GENIExperimenter/Tutorials/Graphics:tip.png, 20, left)]] A new slice will always be in its initial state with NO routing set up!