Changes between Version 1 and Version 2 of GENIEducation/SampleAssignments/IPRouting/Procedure


Ignore:
Timestamp:
09/10/13 11:37:43 (11 years ago)
Author:
nriga@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIEducation/SampleAssignments/IPRouting/Procedure

    v1 v2  
    4545== Set Up ==
    4646
    47 [[Image(design.png, left)]]
     47[[Image(GENIExperimenter/Tutorials/Graphics:design.png, left)]]
    4848
    4949This experiment assumes you have already setup your account at the GENI Portal. In particular ensure that:
    50  1. You can login to the [https://portal.geni.net GENI Portal]
    51  2. You are a member of a GENI Project (there is at least a project listed under the ''Projects'' tab.
    52  3. You have setup your ssh keys (there is at least one key listed under the ''Profile->SSH Keys'' tab.
     50   1. You can login to the [https://portal.geni.net GENI Portal]
     51   2. You are a member of a GENI Project (there is at least a project listed under the ''Projects'' tab.
     52   3. You have setup your ssh keys (there is at least one key listed under the ''Profile->SSH Keys'' tab.
    5353
    5454If all of the above are done then follow these steps to setup the topology for this exercise:
    55  4. Login to the  [https://portal.geni.net GENI Portal] and create a slice
    56  5. Reserve resources within this slice using the [http://www.gpolab.bbn.com/experiment-support/IPRouting/EG-3nodes-mesh.rspec EG-3nodes-mesh] rspec
     55   4. Login to the  [https://portal.geni.net GENI Portal] and create a slice
     56   5. Reserve resources within this slice using the [http://www.gpolab.bbn.com/experiment-support/IPRouting/EG-3nodes-mesh.rspec EG-3nodes-mesh] rspec
    5757
    5858Wait until your resources are ready and move to the next part.
     
    6060== Experiment ==
    6161
    62 [[Image(execute.png, left)]]
     62[[Image([[Image(GENIExperimenter/Tutorials/Graphics:execute.png, left)]]
    6363
    6464The goal of this exercise is to setup the routing as indicated in Figure 1; i.e.  packets from A send to IP address 192.168.2.12 on node C should be routed via node B. In the current setup packets from A to C go directly. :
     
    7777== Finish ==
    7878
    79 [[Image(finish.png, left)]]
     79[[Image(GENIExperimenter/Tutorials/Graphics:finish.png, left)]]
    8080
    8181 1. Return to the Slice page on Portal. On the row in the aggregate table for the aggregate you used, press the Delete Resources button.