Changes between Version 9 and Version 10 of GENIEducation/SampleAssignments/IPRouting/Procedure
- Timestamp:
- 09/10/13 11:57:31 (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GENIEducation/SampleAssignments/IPRouting/Procedure
v9 v10 81 81 [[BR]][[BR]] 82 82 83 [[Image(GENIExperimenter/Tutorials/Graphics:tip.png, left,10%)]] 83 84 === Tips === 84 [[Image(GENIExperimenter/Tutorials/Graphics:tip.png, left,10%)]] 85 '''Note''': Remember that you can use “ifconfig” to determine which Ethernet interface (e.g., eth0) is bound to what IP address at each of the nodes.[[BR]] 86 '''Note''': In order to enable forwarding of packets on node B you have to execute the following command: 85 * Remember that you can use “ifconfig” to determine which Ethernet interface (e.g., eth0) is bound to what IP address at each of the nodes.[[BR]] 86 * In order to enable forwarding of packets on node B you have to execute the following command: 87 87 {{{ 88 88 echo 1 > /proc/sys/net/ipv4/ip_forward 89 89 }}} 90 '''Note''':A new slice will always be in its initial state with NO routing set up!90 * A new slice will always be in its initial state with NO routing set up! 91 91 92 92 == Finish ==
