= [wiki:GENIEducation/SampleAssignments/CCNAssignment/ExerciseLayout CCN ASSIGNMENT] = {{{ #!html
Hello GENI index Hello GENI index Hello GENI index
}}} = STEPS FOR SETTING UP = Since this experiment requires to use monitoring tools to monitor the behavior of the network, we use GENI Desktop to enable GEMINI monitoring in our experiment. [[BR]] If you are not familiar with GEMINI or GENI Desktop, here is a very good tutorial: http://groups.geni.net/geni/wiki/GEC16Agenda/InstaGENI = Create an Experimental Topology for Sharing Precipitation data using CCN network = - 1. Download the RSpec from http://www.gpolab.bbn.com/experiment-support/CCNExampleExperiment/ccn-precip-pc.rspec (or http://www.gpolab.bbn.com/experiment-support/CCNExampleExperiment/ccn-precip-pc-gemini.rspec for and RSpec with GEMINI extensions). - 2. Follow the tutorial on [http://www.protogeni.net/wiki/GeniTutorial GENIDesktop Tutorial] to create the topology using ccn-precip-pc.rspec through [https://genidesktop.netlab.uky.edu GENIDesktop] on Flack, with GEMINI extension enabled [[BR]] '''Note: ''' When import the rspec file, Flack interface will ask you which AM to use. Here we use utahemulab. - 3. Log onto the reserved nodes following instructions here: [http://groups.geni.net/geni/wiki/HowTo/LoginToNodes LoginToNodes] Done. After you created and *renewed* the topology from the Flack interface, you will see a topology like the following with green back ground (which means the resources are up and ready): [[BR]] [[Image(topology1.png, 80%, nolink)]] Note the GEMINI monitoring node `GNutahemulabcm0`. = [wiki:GENIEducation/SampleAssignments/CCNAssignment/ExerciseLayout/Execute Next: Run Experiment] =