Version 18 (modified by Hussamuddin Nasir, 9 years ago) (diff)




I see a message "Failed to logon to the Genidesktop" when using my Geni Portal login ?

No image "failed_logon.png" attached to GD

Make sure you typed in the correct passphrase for the ssh keys you have generated at the Geni Portal.
If you need additional assistance , please email

After login , i see my slices , but it says "No Resources Present" even though i have slivers reserved.

You may have the wrong Aggregate managers selected, or they system automatically picked some for you which are not correct. You need to manually select the Aggregate managers you have used for this slice, so that the Genidesktop knows who to communicate with in-order to get information about your slice and nodes. Follow the arrows to set the AMs appropriately. Then select the slice using the checkbox and perform the "Update Status" operation again on that slice.
No image "no_resources.png" attached to GD No image "set_am.png" attached to GD

My Slice state says "MIXED". What should I do ?

Your slice may have had resources from more than one aggregate. When you had used the Genidesktop to "Initialize/Instrumentize" your slice, you may not have had all your Aggregate Managers selected in the AM list selection. But there is hope of recovery. Perform the following operations to bring the state of the slice to a recognized state.

  1. Find the AM at which your resources are atleast at the "INITIALIZED/INSTRUMENTIZED" state. ()