Changes between Version 15 and Version 16 of GEMINIv1.1Tutorial

Timestamp:

10/21/12 22:20:50 (11 years ago)

Author:

Ahmed El-Hassany

Comment:

--

GEMINIv1.1Tutorial

@@ -340 +340 @@
   2. Know the passphrase for your GENI certificate file. GEMINI currently does not support decrypted/unencrypted GENI certificates. Its easier and less cumbersome if you can store your passphrase in ~/.ssl/password as explained in the User Workspace setup explained earlier.
   3. The sliver status for your slice is "READY".
-  4. Make sure you can ssh into the nodes in your slice without being prompted for password. This functionality is one of the fundamental and necessary requirements of setting up the GEMINI I&M System on your slice.  See [http://groups.geni.net/geni/wiki/GEMINIGEC15VMInstructions#SSLKeyPasswordConfiguration instructions] for adding your key to the ssh-agent.
+  4. Make sure you can ssh into the nodes in your slice without being prompted for password. This functionality is one of the fundamental and necessary requirements of setting up the GEMINI I&M System on your slice.  See [http://groups.geni.net/geni/wiki/GEC15TutorialVMInstructions#SSLKeyPasswordConfiguration instructions] for adding your key to the ssh-agent.
   5. Renew your slice and slivers. Some certificates used in GEMINI are tied to your slice's expiration date and would need to be manually updated if your slice is renewed after the instrumentize process.
 
@@ -362 +362 @@
 While the instrumentize process is running you will see messages printed out on your terminal informing the action being performed at each stage of the process. In short, the list of steps being performed are
 
-    1. Check all Nodes to be intrumentized for OS compatibility with the GEMINI Software
+    1. Check all Nodes to be instrumentized for OS compatibility with the GEMINI Software
     2. Send your manifest to the UNIS Server (UNIS is mentioned in the GEMINI Documentation)
     3. Obtain Credential to view Active measurements
@@ -462 +462 @@
  - at completion:
    - one run of experiment has been completed
-   - real-time look at measurements has verfied expected operation of experiment
+   - real-time look at measurements has verified expected operation of experiment
    - a full set of measurements has been collected, for later analysis and presentation
-   - collected measurments have been transfered to storage service, so that slice resources can be released (if desired) 
+   - collected measurements have been transferred to storage service, so that slice resources can be released (if desired) 
    
 4.4)  Store collected measurements and other artifacts from test/tutorial/experiment in storage service