Navigation: [wiki:GEMINI/Tutorial/GEC20/Tasks Up]

[[PageOutline]]
= Exercise: Retrieve Experiment Data from the Measurement Backend =



== Exercise Description ==

In this exercise you will continue the previous exercise. After your experiment data is collect and displayed through GENI Desktop, you can access the raw data and edit and display it however you want. You will also get familiar with the whole GEMINI architecture by understand how the measurements are executed and how the data are stored.

== Prerequisites ==
This exercise assumes that you have already
 * successfully run a BLiPP measurement from previous exercise and see the data generated from GENI Desktop interface.

== Tutorial Instructions ==
{{{
#!html


<table id="Table_01" height="409" border="0" cellpadding="0" cellspacing="0">
	<tr>
		<td>
			<img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/design.png?format=raw" width="152" height="152" alt="Design/Setup">
               </td>
               <td>
<ul> 
             <li>Part I: Setup - NOT NEEDED (Your experiment should already be setup, please skip to the next step)</li>
             </ul>
               </td>
	</tr>
	<tr>
		<td>
			<img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/execute.png?format=raw" width="152" height="143" alt="Execute">
                </td>
		<td>
             <ul>
<li>Part II: Execute</li>
             <ul> 
                 <li><a href="http://groups.geni.net/geni/wiki/GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_data/RetrieveData">Execute Experiment: Retrieve data and display it</a> </li>
             </ul></ul>
                </td>
	</tr>
	<tr>
		<td>
			<img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/finish.png?format=raw" width="152" height="114" alt="Finish">
                </td>

		<td>
             <ul>
             <li>Part III: Finish</li>
             <ul>
                 <li>No cleanup needed.</li>
             </ul></ul>
                </td>

	</tr>
</table>

}}}